Nema 23 (57mm) hybride lineêre stappenmotor
>> Koarte beskriuwingen
| Motor Type | Bipolar stepper |
| Stap hoeke | 1.8° |
| Spanning (V) | 2.3 / 3 / 3.1 / 3.8 |
| Aktueel (A) | 3/3/4/4 |
| Wjerstân (Ohm) | 0,75 / 1 / 0,78 / 0,95 |
| Induktânsje (mH) | 2.5 / 4.5 / 3.3 / 4.5 |
| Lead Wires | 4 |
| Motorlengte (mm) | 45/55/65/75 |
| Omjouwingstemperatuer | -20℃ ~ +50℃ |
| Temperatuer Rising | 80K Max. |
| Dielektryske sterkte | 1mA Max.@ 500V, 1KHz, 1 sek. |
| Isolaasje Resistance | 100MΩ Min.@500Vdc |
>> Produktbeskriuwing
Grutte
20mm, 28mm, 35mm, 42mm, 57mm, 60mm, 86mm
Typ
Eksterne, net-fange, finzene
Stepper
0.001524mm~0.127mm
Pprestaasje
Maksimum stuwkracht oant 240 kg, lege temperatuerferheging, lege trilling, leech lûd, lange libbensdoer (oant 5 miljoen syklusen), en hege posisjonearringsnauwkeurigens (oant ± 0.01 mm)
Aapplikaasje
Medyske diagnostyske apparatuer, libbenswittenskiplike ynstruminten, robots, laserapparatuer, analytyske ynstruminten, semiconductorapparatuer, elektroanyske produksjeapparatuer, net-standert automatisearringsapparatuer en ferskate soarten automatisearringsapparatuer
>> Elektryske parameters
| Motor Grutte | foltaazje /Faze (V) | Aktueel /Faze (IN) | Ferset /Faze (Ω) | Induktânsje /Faze (mH) | Oantal Lead Wires | Rotor Inertia (g.cm2) | Motor Gewicht (g) | Motorlengte L (mm) |
| 57 | 2.3 | 3 | 0,75 | 2.5 | 4 | 150 | 580 | 45 |
| 57 | 3 | 3 | 1 | 4.5 | 4 | 300 | 710 | 55 |
| 57 | 3.1 | 4 | 0.78 | 3.3 | 4 | 400 | 880 | 65 |
| 57 | 3.8 | 4 | 0,95 | 4.5 | 4 | 480 | 950 | 75 |
>> Lead screw spesifikaasjes en prestaasjes parameters
| Diameter (mm) | Foarsprong (mm) | Stap (mm) | Power off sels-locking krêft (N) |
| 9.525 | 1.27 | 0.00635 | 800 |
| 9.525 | 2.54 | 0.0127 | 300 |
| 9.525 | 5.08 | 0.0254 | 90 |
| 9.525 | 10.16 | 0.0508 | 30 |
| 9.525 | 25.4 | 0.127 | 6 |
Opmerking: nim dan kontakt mei ús op foar mear spesifikaasjes foar leadschroef.
>> 57E2XX-XXX-X-4-150 standert eksterne motor outline tekening
Nopmerkings:
Lead screw lingte kin wurde oanpast
Oanpaste ferwurkjen is leefber oan 'e ein fan lead screw
>> 57NC2XX-XXX-X-4-S standert captive motor outline tekening
Nopmerkings:
Oanpaste ferwurkjen is leefber oan 'e ein fan lead screw
| Stroke S (mm) | Diminsje A (mm) | Ofmjittings B (mm) | |||
| L = 45 | L = 55 | L = 65 | L = 75 | ||
| 12.7 | 24.1 | 1.1 | 0 | 0 | 0 |
| 19.1 | 30.5 | 7.5 | 0 | 0 | 0 |
| 25.4 | 36.8 | 13.8 | 4.8 | 0 | 0 |
| 31.8 | 43.2 | 20.2 | 11.2 | 0.2 | 0 |
| 38.1 | 49,5 | 26.5 | 17.5 | 6.5 | 0 |
| 50,8 | 62.2 | 39.2 | 30.2 | 19.2 | 9.1 |
| 63,5 | 74,9 | 51.9 | 42.9 | 31.9 | 21.9 |
>> 57N2XX-XXX-X-4-150 standert non-captive motor outline tekening
Nopmerkings:
Lead screw lingte kin wurde oanpast
Oanpaste ferwurkjen is leefber oan 'e ein fan lead screw
>> 57EC2XX-XXX-X-4-S elektryske silinder outline tekening
Nopmerkings:
Oanpaste ferwurkjen is leefber oan 'e ein fan lead screw
| Slag S (mm) | Ofmjittings A (mm) |
| 25 | 52 |
| 50 | 77 |
| 75 | 102 |
| 100 | 127 |
| 150 | 177 |
| 200 | 227 |
| 300 | 327 |
| 400 | 427 |
| 500 | 527 |
>> Faasje en thrust curve
57 rige 45mm motor lingte bipolar Chopper drive
100% hjoeddeistige pulsfrekwinsje en thrust curve (Φ9.525mm lead screw)
57 rige 55mm motor lingte bipolar Chopper drive
100% hjoeddeistige pulsfrekwinsje en thrust curve (Φ9.525mm lead screw)
| Lead (mm) | Lineêre snelheid (mm/s) | ||||||||
| 1.27 | 1.27 | 2.54 | 3.81 | 5.08 | 6.35 | 7.62 | 8.89 | 10.16 | 11.43 |
| 2.54 | 2.54 | 5.08 | 7.62 | 10.16 | 12.7 | 15.24 | 17.78 | 20.32 | 22.86 |
| 5.08 | 5.08 | 10.16 | 15.24 | 20.32 | 25.4 | 30.48 | 35.56 | 40.64 | 45.72 |
| 10.16 | 10.16 | 20.32 | 30.48 | 40.64 | 50,8 | 60.96 | 71.12 | 81.28 | 91.44 |
| 25.4 | 25.4 | 50,8 | 76.2 | 101.6 | 127 | 152.4 | 711.8 | 203.2 | 228,6 |
Test betingst:
Chopper drive, gjin ramping, heale mikro-stepping, drive voltage 40V
57 rige 65mm motor lingte bipolar Chopper drive
100% hjoeddeistige pulsfrekwinsje en thrust curve (Φ9.525mm lead screw)
57 rige 75mm motor lingte bipolar Chopper drive
100% hjoeddeistige pulsfrekwinsje en thrust curve (Φ9.525mm lead screw)
| Lead (mm) | Lineêre snelheid (mm/s) | ||||||||
| 1.27 | 1.27 | 2.54 | 3.81 | 5.08 | 6.35 | 7.62 | 8.89 | 10.16 | 11.43 |
| 2.54 | 2.54 | 5.08 | 7.62 | 10.16 | 12.7 | 15.24 | 17.78 | 20.32 | 22.86 |
| 5.08 | 5.08 | 10.16 | 15.24 | 20.32 | 25.4 | 30.48 | 35.56 | 40.64 | 45.72 |
| 10.16 | 10.16 | 20.32 | 30.48 | 40.64 | 50,8 | 60.96 | 71.12 | 81.28 | 91.44 |
| 25.4 | 25.4 | 50,8 | 76.2 | 101.6 | 127 | 152.4 | 711.8 | 203.2 | 228,6 |
Test betingst:
Chopper drive, gjin ramping, heale mikro-stepping, drive voltage 40V
