Nema 8 (20mm) hybride lineêre stappenmotor
>> Koarte beskriuwingen
| Motor Type | Bipolar stepper |
| Stap hoeke | 1.8° |
| Spanning (V) | 2.5 / 6.3 |
| Aktueel (A) | 0.5 |
| Wjerstân (Ohm) | 5.1 / 12.5 |
| Induktânsje (mH) | 1.5 / 4.5 |
| Lead Wires | 4 |
| Motorlengte (mm) | 30 / 42 |
| Omjouwingstemperatuer | -20℃ ~ +50℃ |
| Temperatuer Rising | 80K Max. |
| Dielektryske sterkte | 1mA Max.@ 500V, 1KHz, 1 sek. |
| Isolaasje Resistance | 100MΩ Min.@500Vdc |
>> Elektryske parameters
| Motor Grutte | Spanning / Fase (V) | Aktuele / Fase (IN) | Ferset / Fase (Ω) | Induktânsje / Fase (mH) | Oantal Lead Wires | Rotor Inertia (g.cm2) | Motor Gewicht (g) | Motorlengte L (mm) |
| 20 | 2.5 | 0.5 | 5.1 | 1.5 | 4 | 2 | 50 | 30 |
| 20 | 6.3 | 0.5 | 12.5 | 4.5 | 4 | 3 | 80 | 42 |
>> Lead screw spesifikaasjes en prestaasjes parameters
| Diameter (mm) | Foarsprong (mm) | Stap (mm) | Power off sels-locking krêft (N) |
| 3.5 | 0.3048 | 0.001524 | 80 |
| 3.5 | 1 | 0.005 | 40 |
| 3.5 | 2 | 0.01 | 10 |
| 3.5 | 4 | 0.02 | 1 |
| 3.5 | 8 | 0.04 | 0 |
Opmerking: nim dan kontakt mei ús op foar mear spesifikaasjes foar leadschroef.
>> 20E2XX-XXX-0.5-4-100 standert eksterne motor outline tekening
Nopmerkings:
Lead screw lingte kin wurde oanpast
Oanpaste ferwurkjen is leefber oan 'e ein fan lead screw
>> 20NC2XX-XXX-0.5-4-S standert captive motor outline tekening
Nopmerkings:
Oanpaste ferwurkjen is leefber oan 'e ein fan lead screw
| Stroke S (mm) | Diminsje A (mm) | Ofmjittings B (mm) | |
| L = 30 | L = 42 | ||
| 9 | 14.6 | 0.4 | 0 |
| 12.7 | 18.3 | 4.1 | 0 |
| 19.1 | 24.7 | 10.5 | 0.3 |
| 25.4 | 31 | 16.8 | 6.6 |
| 31.8 | 37.4 | 23.2 | 13 |
| 38.1 | 43.7 | 29.5 | 19.3 |
| 50,8 | 56.4 | 42.2 | 32 |
>> 20N2XX-XXX-0.5-4-100 standert net-captive motorkonturtekening
Nopmerkings:
Lead screw lingte kin wurde oanpast
Oanpaste ferwurkjen is leefber oan 'e ein fan lead screw
>> Faasje en thrust curve
20 rige 30mm motor lingte bipolar Chopper drive
100% hjoeddeistige pulsfrekwinsje en thrust curve (Φ3.5mm lead screw)
20 rige 42mm motor lingte bipolar Chopper drive
100% hjoeddeistige pulsfrekwinsje en thrust curve (Φ3.5mm lead screw)
| Lead (mm) | Lineêre snelheid (mm/s) | |||||||||
| 0.3048 | 0.3048 | 0.6096 | 0.9144 | 1.2192 | 1.524 | 1.8288 | 2.1336 | 2.4384 | 2.7432 | 3.048 |
| 1 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| 2 | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 |
| 4 | 4 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 |
| 8 | 8 | 16 | 24 | 32 | 40 | 48 | 56 | 64 | 72 | 80 |
Test betingst:
Chopper drive, gjin ramping, heale mikro-stepping, drive voltage 24V
